40 vuotta falch!

tänä vuonna juhlimme ylpeänä 40-vuotista taivalta. yhden miehen yrityksestä falch on kasvanut yritykseksi, jolla on yli 300 työntekijää ja joka toimii vesipuhdistuksen alalla. mikä uskomaton matka, josta olemme todella kiitollisia!

read more »

kumin poistaminen ennätysajassa

frankfurtin lentokentän kiitoradalta piti poistaa iso määrä kumijäämiä.

 

 

read more »

kumin poistaminen ennätysajassa

frankfurtin lentokentän kiitoradalta piti poistaa iso määrä kumijäämiä.

 

 

read more »

hyppy kylmään veteen: parhaalla tavalla - harjoittelijamatka 2025

myös tänä vuonna oppisopimusopiskelijamme lähtivät seikkailulliselle retkelle tutustuakseen toisiinsa ja oppiakseen tekemään yhteistyötä. tällä kertaa matkustimme bussilla kauniiseen sonthofeniin allgäussa, missä pidimme virkistävän tauon olutpuutarhassa ja jatkoimme sen jälkeen koskenlaskuun.

read more »

vesi virtaa ja menoksi – perehdytysviikko harjoittelijoille

myös tänä vuonna saamme toivottaa tervetulleeksi 6 uutta oppisopimusopiskelijaa falchille. tutustumisleikkien ja käyttäytymiskoulutusten lisäksi järjestettiin jälleen rallikilpailuja blaubeurenissa ja merklingenissä, jotta uusia kasvoja nähtäisiin ja alueeseen tutustuttaisiin. myös hieman hauskanpitoa laitteilla kuului ohjelmaan: ensin kierros showroomissa "fascination waterjetting" ja sen jälkeen itsenäistä suihkutusta oli suunnitelmassa.

read more »

kumin poistaminen ennätysajassa

frankfurtin lentokentän kiitoradalta piti poistaa iso määrä kumijäämiä.

 

 

read more »

nousta siiville työssä - lentokenttäjuhla sonderbuch 2025

tämän vuoden sonderbuchin lentokenttäjuhlassa ihastutimme jälleen suihkunäytöksellämme. trailjet 30 500 bar -laitteella lavan täydellinen läpileikkaus kiehtoi sekä nuoria että vanhoja. myös tällä kertaa oli mahdollista voittaa hienoja palkintoja, kuten lento 4 hengelle. juhla oli jälleen täysi menestys, mistä kertoi yli 1000 kävijää.

read more »

korkeapainetekniikka kohtaa maailmanperinnön: vesiputkiremontti ponte vecchiolla

firenze – kuuluisalla ponte vecchion sillalla, joka on unescon maailmanperintökohde, neljä ikääntyvän vesiputken osuutta kunnostettiin äskettäin onnistuneesti. suojellun statuksen vuoksi projektiin saivat osallistua vain sertifioidut kumppanit. falchin projektikonsultteina tommy ditrani ja sergio vicari antoivat teknistä neuvontaa varsinaiselle urakoitsijakumppanille, joka vastasi putkien kunnostuksesta.

 

 

read more »

harjoittelijaprojekti – tartan-rata loistaa uudessa kirkkaudessa

osana projektia 3 harjoittelijaa ja top rent -vastaavamme lähtivät trailjet 30:n ja scater 5:n kanssa sg nellingenin urheilualueelle puhdistamaan tartaanirataa. tämä ei ollut hyödyllistä ainoastaan harjoittelijoille laitteisiin tutustumisen ja niiden käytön oppimisen kannalta, vaan myös urheilijoille, jotka voivat nyt harjoitella tehokkaammin ja turvallisemmin.

read more »

futuristinen hiihtokeskus Saudi-Arabian aavikolla...

luonto, innovaatio ja ylellisyys. yhdistettynä neljän falch-koneen avulla: webuild-yritys haluaa toteuttaa vision saudiarabiaan. aavikon keskelle on tarkoitus luoda hiihtokeskus.

 

 

read more »

lift worker heli

lift worker heli -järjestelmällä falch määrittelee pintakäsittelyn uudelleen: järjestelmällä saavutetaan 250-400 m²:n pinta-alatulos tunnissa - kymmenkertainen suorituskyky perinteiseen käsin suoritettavaan lansettityöskentelyyn nähden. Heli on kehitetty korkeimpia vaatimuksia vaativiin teollisuussovelluksiin, ja sen avulla suuria pinta-aloja voidaan käsitellä taloudellisesti ja tasaisen korkealla laadulla.

read more »

asbestipitoinen bitumi - mitä tehdä?

miten asbestipitoiset bitumikerrokset voidaan poistaa ammattimaisesti ilman, että saastunut jätevesi pääsee ympäristöön? falch pystyi aktiivisesti tukemaan asiantuntijoita tässä asiassa: uusilla vedenkäsittelyjärjestelmillä cont sed 100, base sed 30 ja base filt 50 band jätevesi voitiin suodattaa kaskadeissa, sedimentoida ja poistaa poistettu materiaali ammattimaisesti. onnistuneen puhdistuksen ja vesitestien läpäisyn jälkeen puhdistettu vesi voitiin johtaa turvallisesti pois.

 

 

read more »

valmistustekniikan koulutuspäivä – laichinger alb 2025

taas kerran falch ja muut alueelliset yritykset olivat edustettuina ehingenin ammattikoulun valmistustekniikan koulutuspäivässä. oppilaat osoittivat innostusta paitsi tuotteita kohtaan, myös kiinnostusta yritystä kohtaan. olimme jälleen innoissamme saadessamme luoda niin monia uusia kontakteja.

read more »

customers from all over the world visit merklingen and blaubeuren

when falch invites customers from all over europe to its in-house exhibition: at the water jetting expert days at the beginning of april, the specialist for professional water jetting technology not only presented its latest equipment and automation solutions, but also showed what makes falch an employer with a future.

read more »

drum rob 250 - helppokäyttöinen rumpujen puhdistus kuorma-autosekoittimille

with walter’s smart cleaning solution and our powerful falch 250 kw trail jet, we now offer the long-awaited automated system to clean mixers from the inside and remove even the toughest concrete residues.

read more »

falch focuses on automation

a 6-axis fanuc robot has recently been installed in falch factory 3 at the lonsee site. this investment represents a significant step forward in the areas of efficiency and automation.

read more »

efficient tank renovation with falch technology

the renovation a large tank at the mineral oil refinery in karlsruhe involved a challenging task: the removal of a 4-6 mm thick coating of sika permacor with graphite inside the tanks. thanks to falch, this project could not only be completed faster, but also more cost-effectively than the conventional sandblasting process.

 

read more »

we have moved!

the entire competence center poland, previously based in katowice, piekary śląskie, successfully moved to katowice bytom in 2024.

read more »

falch makes the cable mess disappear with the “radio gun control”

with the new "radio gun control" falch is introducing an advanced wireless control system that makes the operation of high-pressure systems more efficient and safer. this wireless control system offers a flexible and practical alternative to conventional wired solutions.

read more »

successful heat exchanger cleaning in italy:

falch presents an innovative application for the “beam rob 250”.

automated cleaning of heat exchangers - precise, efficient and future-oriented.

 

read more »

onnistunut koulutusmessutapahtuma hessenhöfen konferenssikeskuksessa

täysi menestys saavutettiin marraskuussa hessenhöfenin kokouskeskuksessa. messujen alkaessa klo 11 aamulla saapui useita koululuokkia vierailemaan ja kuuntelemaan tietoa alueen koulutusyrityksistä. keskipäivän aikaan paikalla oli erityisesti vanhempia lastensa kanssa. vaikka kävijämäärä väheni keskipäivällä, päivä oli silti onnistunut.

read more »

falchin ensimmäinen harjoittelijatapaaminen inspiroi osallistujia

kouluttajamme keksivät jotain erityistä harjoittelijoilleen: yhteisen illan. koska tekniset ja kaupalliset opiskelijat ja harjoittelijat kohtaavat harvoin, halusimme luoda yhteisöllisyyttä. herkullisen ruoan ja muutaman keilakierroksen parissa kaikki pystyivät vaihtamaan ajatuksia keskenään. ilta johti täydelliseen innostukseen ja tullaan ehdottomasti toistamaan.

read more »

informaatiotilaisuus opiskelusta albert-schweitzer-gymnasiumissa

tiistaina järjestettiin kumppanikoulussamme, albert-schweitzer-gymnasiumissa laichingenissa, tiedotustilaisuus oppilaille, jossa käsiteltiin opiskeluun liittyviä aiheita. erityisen kiinnostavaksi monille osoittautui myöhemmin henkilökohtaisessa kyselyosuudessa kaksoisopiskelu, josta henkilöstöosastomme ja opiskelijamme pystyivät vastaamaan muutamiin kysymyksiin.

read more »

"yes, i do"

falch proudly presents the base jet 500 – a top-tier water jetting system designed to tackle the full scope of your challenges.

read more »

new falch service center opened in nuremberg

falch has opened a new service center (sc) in nuremberg, thereby strengthening its presence in the region. The service center offers customers professional advice, rent and the usual high-quality FALCH service.

read more »

trainee excursion 2024

this year again, our new and old trainees were able to get to know each other during a relaxed trip. from blaubeuren, they went in the morning to rammingen to the leisure park skyline park. whether it was the sky shot for our adrenaline junkies or the ferris wheel for those who prefer it more relaxed, the trip was a complete success in every respect and excited all the trainees and our trainers.

read more »

a radiant start to business life - trainee week

this year, falch was pleased to welcome 8 new trainees in the commercial and technical fields. from trainings and information events to orientation rallies and independent blasting, our newcomers were able to experience everything before working life begins next week.

read more »

lentokenttäjuhla sonderbuch 2024

kouluttajamme osallistuivat myös tänä vuonna sonderbuchin lentokenttäjuhliin. trailjet 125:n 2500 barin esittely sai kaikki katsojat sanattomiksi. kaikki yritystä ja tuotteita koskevat kysymykset voitiin selvittää. myöhemmin peleillä ja hauskanpidolla oli mahdollista voittaa hienoja palkintoja, kuten esimerkiksi 4 hengen lentomatka ulmin yläpuolella moottorilentokoneella. unohtumaton päivä herätti jälleen kerran innostusta.

read more »

combat readiness under extreme pressure

falch restores military frigate

read more »

revolutionary robot solution for blasting metal surfaces

introduction of the new climb rob 250 robot. quick and efficient blasting of large metal surfaces.

read more »

tuotantotekniikan koulutuspäivä – laichinger alb 2024

taas kerran falch ja muut alueelliset yritykset olivat edustettuina ehingenin ammattikoulun valmistustekniikan koulutuspäivässä. oppilaat osoittivat innostusta paitsi tuotteita kohtaan, myös kiinnostusta yritystä kohtaan. positiivinen palaute vahvistaa meitä entisestään palaamaan ensi vuonna ja luomaan kontakteja opiskelijoiden, opettajien ja muiden yritysten kanssa.

read more »

exciting news from falch!

explore our latest offerings and discover how we're redefining industry standards with our top-quality products.

read more »

new line worker 250 dissolves even the most stubborn layers

leading supplier of industrial minerals no longer saw the ground beneath their feet.

read more »

falch water jetting days: a whole world of water jetting…

with more than 20 devices, 100 accessories and the very latest robotic tools – our falch-team will be visiting 4 falch-branches in le havre, lyon, barcelona and zürich this year, having packed all of this onto two huge trucks.

read more »

wheel jet 30 2000-8, ultra-high pressure water jets without recoil force?

the new wheel jet 30 cannot be operated entirely without recoil force, but when compared to conventional ultra-high pressure water jets, the recoil of the new wheel jet 30 seems almost "playful".

read more »

our ecological footprint!

is falch sustainable?

read more »

fully automatic concrete removal with the surface rob from falch

in north-eastern brazil, major concerns existed about newly constructed foundations for wind turbines: 70 concrete foundations had become a problem due to poor concrete quality.

read more »

hot – hotter – base jet 30 d: the redesigned 500 bar hot water system!

the base jet 30 is our brand new diesel version: with a working pressure of 500 bar and hot water, it’s the ideal choice for longer work assignments.

read more »

falch heli jetting: 800 m² per hour cleaned in bamberg lock

around 22,000 m² of concrete surfaces were to be cleaned in the bamberg lock. the lock on the danube-main canal has a useful length of 190 m and is 12 m wide, and the average drop height is 10.94 m.

read more »

line worker 250: optimum coverage and perfect suction!

with the line worker 250, falch is introducing a brand-new system for cleaning and removing coatings from floors.

read more »

old steel bridge in the port of hamburg renovated with falch!

for a long time, the 290 m long kattwyk bridge was the largest lift bridge in germany.

read more »

stc umwelt ag removes 150 m³ of concrete with falch

stc umwelt ag, a swiss surface specialist, needed to remove 150 m³ of concrete – equivalent to a weight of around 375 tonnes – from a public building.

read more »

30 years at falch!

the management was very pleased to be able to congratulate our employees on their 30th anniversary.

read more »

customer proximity is improving: branches, service points and rental bases throughout europe!

it is extremely important to us that our bases are easily accessible – we can be on site on our customers’ premises or at their projects within a very short time.

read more »

concrete art with pure water and falch nozzle technology

we already knew that falch water jetting technology can be used for many different purposes. but we were surprised by what "take off", a company from the south of france, uses the falch units for!

read more »

lift worker 250: five times faster than the handheld lance

with the lift worker 250, falch is presenting the lightest, most flexible and most affordable tool for semi-automated surface treatment of walls and ceilings.

read more »

scater: the new scater range is setting new jetting result and suction power standards!

all in all, the scater are now much more robust. both the chassis and the drawbar have been stabilised, and the size of the wheels has been increased from 80 to 150 mm.

read more »

falch supports DHHN deutsche humanitäre hilfe nagold e.v. with aid convoy to ukraine

we are happy to have been able to support DHHN deutsche humanitäre hilfe nagold e.v. in their aid convoy by providing our falch truck including diesel.

read more »

municipalities have caught the spring-cleaning bug

public squares are every municipality’s calling card – but that shouldn’t be the only reason to regularly give outdoor surfaces a right good clean.

read more »

falch blaubeuren: the best water jet equipment and robots for your projects are made here!

it was time for us to expand so that we can meet the ever-increasing demand for professional falch-systems, pumps, accessories and water jetting robots.

read more »

putin's war in ukraine

customer information for all falch customers in russia

read more »

new! falch competence center barcelona

our team in spain has been working for our customers on site for several months. we’re now delighted to have found the perfect premises for our branch office in tarragona.

read more »

surface rob 250: fully automated ship paint stripping

more and more shipyards are relying on ultra-high-pressure water jetting technology to remove rust and paint from ships.

read more »

beam rob 250: perfectly clean formwork and scaffolding parts

now’s the perfect time to clean your formwork and scaffolding and to get it back in shape for the coming season.

read more »

water jetting 4.0 showroom – the future of water jetting

water jetting 4.0 is the name of the 500 m² permanent showroom in blaubeuren, where interested visitors can discover our complete product range from the automated water jetting segment.

read more »

new! falch competence centre in le havre

some time ago, our second branch in france opened its doors.

read more »

scater 5 restores the water permeability of tartan tracks

it's always fascinating to see how fresh and shiny the tartan track on sports fields is after the scater 5 has removed the fine dust, moss and other dirt from the coarse structure.

read more »

2700 m² special ceiling refurbished with surface rob 250

the contract, for subsoil preparation, that the heinrich schmid branch in freiburg was awarded, as part of the renovation work on the federal constitutional court in karlsruhe, was not as easy as it sounded.

read more »

base jet 250: the latest generation at the shipyard with 250 kW and 3000 bar

with a whopping 250 kW drive power and 3000 bar working pressure, the base jet 250 is a new generation of ultra-high-pressure systems for shipyards.

read more »

lift worker 250 beam: the jetting tool for maximum area coverage

with the lift worker 250 beam, falch has introduced a new tool that makes large surface areas faster, easier and safer to process.

read more »

falch water jetting days: a whole world of water jetting…

with more than 20 devices, 100 accessories and the very latest robotic tools – our falch-team will be visiting 13 falch-branches all over europe this year, having packed all of this onto two huge trucks.

read more »

surface preparation in a sewage treatment plant: over 5,000 m² of surface decoated

3,250 m² of wall surface and 2,100 m² of floor surface needed decoating and roughening for re-coating in the rheinhausen sewage treatment plant.

read more »

new falch competence center in stuttgart/heilbronn!

good news for all companies in the stuttgart/heilbronn area: for a few months now, falch has had its very own branch in pleidelsheim on the a81 motorway.

read more »

frame rob 250: cleaning formworks – it’s that easy!

growing numbers of renowned formwork rental companies are already using the falch water jetting technology to gently and effectively clean their formwork.

read more »

surface rob 250: the world’s lightest fully automatic and purely electric-powered jetting robot guarantees perfectly uniform surface quality!

it’s here at long last – the big brother of the surface worker 250!

read more »

trail jet 250: double the working speed from a 3.5 t car trailer!

our falch trail jet 250 incorporates an immense amount of attention to detail and five years of development – so we’re all the happier that we can now offer our customers such a unique system.

read more »

new in belgium! falch competence center antwerp

at the beginning of the year, our new branch in temse, south of antwerp, opened its doors.

read more »

surface preparation in an underpass: uniform concrete removal with the falch surface worker 250!

besw betonerhaltung südwestfalen gmbh was awarded the refurbishment contract for an underpass in korschenbroich (north rhine-westphalia).

read more »

pointspeed 30 corner gets into every corner: when things get tricky!

pointspeed 30 corner – the rotating nozzle for corners, edges, undercuts and angles.

read more »

trail jet 30: perfect for exterior cleaning and renovation with hot water

the trail jet 30, with 500 bar of working pressure and hot water, is the most sold system of its kind worldwide.

read more »

concrete renovation in a drinking water tank: falch surface worker 250 fits through any door!

many a renovation professional has found themselves with a huge renovation project on their hands – and an entrance so small, they cannot fit their machines through.

read more »

wheel jet 30 e: two electric power packs with 500 and 1000 bar

extremely powerful and robust – this is what distinguishes the two "new" models of the wheel jet series: the wheel jet 30 e in a 500 or 1000 bar version.

read more »

falch expands in poland!

our falch branch in katowice was founded eight years ago. since then, the team surrounding branch manager aleksander zajac has continued to grow as has the demand for more space.

read more »

heat exchanger cleaning in industry: ormonde focuses on safety and maximum efficiency

ormonde is a professional industrial service company with offices in poland, the czech republic, slovakia and ireland, and operates in many in central and eastern european countries.

read more »

surface worker 250: entry-level automatic water jetting!

whether it be ceilings, walls or floors that need to have coatings and paints removed or be cleaned or stripped - falch surface worker 250 can cope: quickly, flexibly, easily and safely.

 

read more »

automatic formwork cleaning with falch surface worker 250: it’s as easy as that!

falch has been making an impression in formwork cleaning for years with its “quality” and “speed”. extremely high-pressure water jetting has been used for years to clean formwork produced by all renowned manufacturers effectively and without causing damage.

read more »

pipe worker 250: fully automatic pipe cleaning or stripping!

nowadays, pipes are now often cleaned or prepared using high-pressure water jets, both internally and externally.

read more »

surface preparation in biogas plant with trail jet 125 and surface worker 250

there are about 10,000 biogas plants in germany alone. the gas they produce is mainly used to generate electricity and heat.

read more »

wheel jet 11 p: your strong friend and helper on any construction site!

with its wheel jet 11 p, falch is making a powerful all-rounder available to all construction and restoration companies...

read more »

falch robotics weeks have started!

at the moment, interested customers have the opportunity to see our latest robotics developments.

read more »

new construction production and logistics

falch has approved the construction for a new production and logistics facility at our blaubeuren site.

read more »

spring-cleaning – sparkling clean exterior surfaces with falch tools!

it's obvious that virtually any small diy high pressure cleaners can clean external surfaces. the only question is: how effective is it?

read more »

falch robotics on tour – 2018

for several months our falch-robotics-expert was on the road with the falch-truck.

read more »

sewer network of the A98 freeway cleaned with 2500 bar

last year, a heavy accident involving 25 vehicles on the a98 occurred due to heavy rainfall with stagnant water on the road.

read more »